Three-phase current sensors
S-HD3L800BVY
The S-HD3L800BVY three-phase current sensor is used for DC, AC or pulsed current measurement in high power and low voltage automotive applications. It provides electrical isolation between the primary circuit (high power section) and the secondary circuit (electronic circuit). This current sensor product enables the selection of different current measurement ranges (from ±100A to ±800A) within the same housing.
Product Characteristics
Current Sensor Designed with Programmable Linear Magnetic Sensors Automotive Grade Chip
Operating temperature range: -45°C < T < +120°C
Output voltage: fully proportional z
Rated current measurement range up to ±800A
Low Voltage Applications
parameter term | notation | unit (of measure) | minimum value | typical value | maximum values | test condition |
Maximum supply voltage | Uc | V | 8 | persistent non-operational state | ||
Output Low Level Voltage | VoutL | 0.2 | ||||
Output High Level Voltage | VoutH | 4.8 | ||||
Ambient storage temperature | Ts | °C | ~40 | 125 | ||
Electrostatic discharge voltage (HBM) | kV | 2 | ||||
AC Insulation Test RMS Voltage | Ud | kV | 2.5 | 50 Hz, 1 minute | ||
creepage distance | mm | TBD | ||||
Clearance distance | mm | TBD | ||||
Relative Leakage Trace Index | TBD | |||||
Maximum reverse current 33 | mA | ~80 | 80 | |||
electrical insulation resistance | M Ω | 500 | 500 V DC |
English 
Chinese